Corepad Skatez PRO Logitech G604
Corepad Skatez are precision-made replacement mouse feet for gamer, high-end and advanced users.
Your original mouse feet are worn out or your mouse glides not that good on your mousepad? No problem: Corepad Skatez create easy quick and efficient remedy.
Corepad Skatez replace exact the original feet of your mouse and can be easily glued to reduce the frictional resistance and improve the sliding properties as replacement-feet under the mouse.
Corepad Skatez consist of 100% pure quality PTFE (polytetrafluoroethylene - Colloquially this plastic is often referred with the trade name Teflon® from DuPont™) and thus offer excellent lubrication at high load capacity. The stiction coefficient is below 0,06μ and thus far below the sliding friction.
The extremely smooth surface of Corepad Skatez reduces the uncomfortable "stick-slip" or almost completely eliminates it. The reduction of the friction provides improved accuracy when playing and working with your mouse. So you can nearly belive that the mouse flies without any resistance over the Mousepad. This unbeaten effect of PTFE offers you in addition to the optimized accuracy also increased ergonomics and fatigue-proofed performance at work and play. Finally you gain the decisive advantage over your opponents in the game. Even if you just use your mouse all day at work or at home, you can act more efficiently with your mouse and protect your wrist simply by using Corepad Skatez.
Another not to be underestimated positive side effect is the protecting property for your mousepad by less wear and increased life - in other words the use of Corepad Skatez pays twice!
Delivery: two sets Corepad Skatez for two applications, instruction
Your original mouse feet are worn out or your mouse glides not that good on your mousepad? No problem: Corepad Skatez create easy quick and efficient remedy.
Corepad Skatez replace exact the original feet of your mouse and can be easily glued to reduce the frictional resistance and improve the sliding properties as replacement-feet under the mouse.
Corepad Skatez consist of 100% pure quality PTFE (polytetrafluoroethylene - Colloquially this plastic is often referred with the trade name Teflon® from DuPont™) and thus offer excellent lubrication at high load capacity. The stiction coefficient is below 0,06μ and thus far below the sliding friction.
The extremely smooth surface of Corepad Skatez reduces the uncomfortable "stick-slip" or almost completely eliminates it. The reduction of the friction provides improved accuracy when playing and working with your mouse. So you can nearly belive that the mouse flies without any resistance over the Mousepad. This unbeaten effect of PTFE offers you in addition to the optimized accuracy also increased ergonomics and fatigue-proofed performance at work and play. Finally you gain the decisive advantage over your opponents in the game. Even if you just use your mouse all day at work or at home, you can act more efficiently with your mouse and protect your wrist simply by using Corepad Skatez.
Another not to be underestimated positive side effect is the protecting property for your mousepad by less wear and increased life - in other words the use of Corepad Skatez pays twice!
Delivery: two sets Corepad Skatez for two applications, instruction
This model Corepad Skatez is made in a special manufacturing process with rounded edges to avoid mousepad grinding, scratching and hooking and thus further to optimize the sliding properties of your mouse. In combination with the high-quality materials used in the manufacture and in which Corepad makes no compromises, you can be sure that with Corepad Skatez you will always get high-quality replacement mouse feet.
Question: What are Corepad Skatez made off?
Answer: Corepad Skatez are only made of the finest materials - quality pure PTFE * and 3M self-adhesive foil - something else is quiet out of the question.
Question: Are Corepad Skatez available in black?
Answer: No, only pure PTFE * is white and therfore has the best slide characteristics. For coloring PTFE * colors must be added which always degrade the sliding properties. Colored mouse feet may additionally been stretched with cheap plastics in order to reduce production costs. Corepad makes no compromises in quality - therefore Corepad Skatez are only available in white.
Question: Do the Corepad Skatez wearout quickly?
Answer: In order to minimize friction and to allow a more comfortable sliding Corepad Skatez have to wearout. The wear out is of course dependent on the mouse pad and your individual usage characteristics. Therefore, you will always receive two pairs of Corepad Skatez for two applications.
* PTFE = polytetrafluoroethylene - Colloquially this plastic is often referred to by the trade name Teflon® DuPont ™
Answer: Corepad Skatez are only made of the finest materials - quality pure PTFE * and 3M self-adhesive foil - something else is quiet out of the question.
Question: Are Corepad Skatez available in black?
Answer: No, only pure PTFE * is white and therfore has the best slide characteristics. For coloring PTFE * colors must be added which always degrade the sliding properties. Colored mouse feet may additionally been stretched with cheap plastics in order to reduce production costs. Corepad makes no compromises in quality - therefore Corepad Skatez are only available in white.
Question: Do the Corepad Skatez wearout quickly?
Answer: In order to minimize friction and to allow a more comfortable sliding Corepad Skatez have to wearout. The wear out is of course dependent on the mouse pad and your individual usage characteristics. Therefore, you will always receive two pairs of Corepad Skatez for two applications.
* PTFE = polytetrafluoroethylene - Colloquially this plastic is often referred to by the trade name Teflon® DuPont ™
- It is important not to increase the distance between the sensor and the surface
- Therefore, the old mouse feet and adhesive residues must always be completely removed
- Please keep the mouse and the mouse pad always clean for perfect gliding
- Check and compare the individual Skatez first
- Do you have the right Corepad Skatez?
- Now remove the old mouse feet
- Adhesive residues must be completely removed
- Clean & Dry the bottom of the mouse
- Carefully remove the foil from the adhesive side
- Do not touch the adhesive surface
- Place the Skatez sequentially to the right place
- Now press the mouse on a table for about 30 seconds
- Your mouse is now ready for new action!
- Have fun with your new Corepad Skatez!
Corepad Skatez consists of 100% pure quality PTFE (polytetrafluoroethylene - Colloquially this plastic is often referred to by the trade name Teflon® DuPont™) and therefore offers excellent lubrication at high load capacity. The stiction coefficient is below 0,06μ and thus far below the sliding friction.
Corepad Skatez are naturally self-adhesive. Here too, only high-quality 3M self adhensive foil is used for the ideal stick of Corepad Skatez.
You can be sure that Corepad makes no compromises when material is selected and you always get the best quality with Corepad Skatez.
Corepad Skatez are naturally self-adhesive. Here too, only high-quality 3M self adhensive foil is used for the ideal stick of Corepad Skatez.
You can be sure that Corepad makes no compromises when material is selected and you always get the best quality with Corepad Skatez.
Brand:
Corepad is a registered trademark of Com-Tra.de / Owner Maik Schoephoerster
Manufacturer:
Com-Tra.de / Owner Maik Schoephoerster, Liegnitzer Str. 6, 32312 Luebbecke, Germany
Contact:
E-Mail: Service@Com-Tra.de
Documentation (Multilingual): Warnings:
Corepad is a registered trademark of Com-Tra.de / Owner Maik Schoephoerster
Manufacturer:
Com-Tra.de / Owner Maik Schoephoerster, Liegnitzer Str. 6, 32312 Luebbecke, Germany
Contact:
E-Mail: Service@Com-Tra.de
Documentation (Multilingual): Warnings:
unaudited review
-
Excellent pads, better than the originals
-
I've ordered these skatez because the original ones of my G604s were really scratched up after only a few weeks of using the mouse. These were very easy to install and are soo much better than the stock ones, everything feels very smooth now. No sign of wear after a few weeks either. Very pleased and would buy them again, especially for this bargain price. easy to install and are soo much better than the stock ones, everything feels very smooth now. No sign of wear after a few weeks either. Very pleased and would buy them again, especially for this bargain price.
go to post -
Works better than stck.
-
5/5 would order again. Works just as advertised and arrived guickly.
-
Beim anbringen der neuen Gleiter muss man unter den original gleitern einen zusätzlichen klebestreiben abmachen. (darunter sind die Schrauben) Sonst passen die gleiter nicht. Sollte evtl. in der beschreibung stehen. passen die gleiter nicht. Sollte evtl. in der beschreibung stehen.
go to post -
Very satisfied
-
-
These skates have an incorrect measurement, especially in the center skate, my mouse is ruined, the laser does not have a correct signal and it jumps too much. Fix that I need my mouse !!! too much. Fix that I need my mouse !!!
go to post -
I have just received these skates and it's incredible how good they are. It's way better than the original. Note: When installing them take extra care to remove the entire old skates. It's like 2 layers of tape on the original. You have to be able to see the screws in all 4 lateral ones. The central circular one doesn't have a screw. care to remove the entire old skates. It's like 2 layers of tape on the original. You have to be able to see the screws in all 4 lateral ones. The central circular one doesn't have a screw.
go to post -
I am the visitor. Apparently the G604 has double mouse feet sandwiched together. Under the mousefeet, there is another rubberized mouse feed looking thing that you can remove, that way you can see the screws. If you don't see the actual plastic or the screw holes, then you need to remove that layer. After removing the layer, these mouse feet is 100% fitted for it. TL;DR : G604 has another rubberized mouse feet under the slidy mouse feet. Remove both and these mouse feet will work flawlessly. thing that you can remove, that way you can see the screws. If you don't see the actual plastic or the screw holes, then you need to remove that layer. After removing the layer, these mouse feet is 100% fitted for it. TL;DR : G604 has another rubberized mouse feet under the slidy mouse feet. Remove both and these mouse feet will work flawlessly.
go to post -
Good quality. Good gliding. Shame they never tested this product on an actual G604 mouse. The feet are too thick, and the sensor can't sense the mousepad because of how thicc the feet are. Resulting in a utter waste of money for the customers, and materials from the manufacturer. TL;DR : Useless mouse feet. Literally useless. mousepad because of how thicc the feet are. Resulting in a utter waste of money for the customers, and materials from the manufacturer. TL;DR : Useless mouse feet. Literally useless.
go to post -
I have only recently gotten a chance to use these. Unfortunately, I think I will have to also stop using them. While the physical feel of moving the mouse is better, the pads appear to be just barely too thick - the mouse has constant stutters of not being able to read the laser feedback due to this. I followed all the steps and have done other things, I've gone one-by-one on the pads and pushed them in as tightly as I can without breaking the plastic of the mouse, I have double checked there is no other material underneath them, I have even used a metal tool to try and push them in harder just in case I wasn't doing it well enough. The mouse cursor does not stutter WHILE I am pushing down hard, but I can't do that for long and the stutter returns. Thus, I know it is a pad thickness issue, however slight it might be, and unfortunately it makes the mouse unusable. As my original pads were damaged in the process of removing them, I'm hoping I can find functional replacements with another company, as I don't really feel like paying the shipping and time to wait for another attempt from Corepad. mouse is better, the pads appear to be just barely too thick - the mouse has constant stutters of not being able to read the laser feedback due to this. I followed all the steps and have done other things, I've gone one-by-one on the pads and pushed them in as tightly as I can without breaking the plastic of the mouse, I have double checked there is no other material underneath them, I have even used a metal tool to try and push them in harder just in case I wasn't doing it well enough. The mouse cursor does not stutter WHILE I am pushing down hard, but I can't do that for long and the stutter returns. Thus, I know it is a pad thickness issue, however slight it might be, and unfortunately it makes the mouse unusable. As my original pads were damaged in the process of removing them, I'm hoping I can find functional replacements with another company, as I don't really feel like paying the shipping and time to wait for another attempt from Corepad.
go to post
unaudited review